AI for inspection firms: the report is the bottleneck

November 22, 2026

Inspecting the electrical installation of a mid sized commercial building takes a few hours on site. Measuring, looking, taking photos, dictating notes. That is the craft, and it is what you hired your inspectors for.

Then the second half of the day starts. Back in the van or at the kitchen table, the photos get sorted, the notes written out, the findings phrased, the clauses of the standard looked up and the report put together. In many inspection firms that takes as long as the inspection itself, sometimes longer.

When owners think about AI for inspection firms, they usually look at the inspection first. An app that spots defects in a photo, a drone, a smarter checklist. That is not where the brake is. The brake is the report. It is also the part you can speed up with AI most safely, because the inspector still signs it by name.

This article is for owners and operations managers of inspection firms with 10 to 200 people: periodic electrical inspections, fire safety, lifts and work equipment, building surveys, asbestos surveys, energy labels. You run hundreds to thousands of inspections a year, your inspectors are scarce, and growth stops at the number of people allowed to sign. It is not for you if you are a sole inspector doing 3 jobs a week, if you want to replace the inspector with a camera, or if you just need a checklist app. You can buy one of those.

In this article you will learn where the hours after an inspection really go, why 12 inspectors often write 12 kinds of report, which part AI does and which part fixed rules do, a worked example with 4,800 inspections a year, what you should not automate, how to start, and what happens after launch.

‍

Key takeaways

• For many inspections the report takes as long as the visit. That is where the capacity you are looking for sits, not on site.

• An inspection app solves the capture. Writing, classifying and checking stay manual work.

• The biggest problem is often not speed but variation: every inspector phrases, classifies and advises a little differently.

• AI drafts the report from your own past reports. Fixed rules check whether it is complete. The inspector decides and signs.

• The real work is your findings library: a standard wording per defect, with classification, reference to the standard and remedial advice.

• In the worked example report time drops from 2 hours to 45 minutes per inspection. That is 6,000 hours a year, about 4 inspectors of capacity.

• Leave the judgement with the inspector. AI that assesses defects from photos makes your report weaker, not stronger.

‍

AI for inspection firms: why another app does not fix it

Most inspection firms stopped working on paper a long time ago. There is a tablet, an inspection app, a checklist per inspection type and a portal where the report ends up. That was a real step. The inspection is captured properly and nobody retypes forms anymore.

Yet almost every firm shows the same pattern. The app records what the inspector ticks. A report is more than a filled in checklist, though. It is a document a client has to understand and a contractor has to act on. Every defect needs a clear description, a photo, a location in the building, a classification, a reference to the standard and advice on how to fix it.

The app does not do that part. The inspector does, in the evening, with the notes alongside. Or the back office team writes up the notes and calls back whenever something is unclear. The app made capture faster. Writing stayed what it was.

That is why yet another app rarely delivers the capacity you need. The question is not how to record the inspection faster. It is how to turn raw observations into a good report in 1 pass, without your best people spending half a day on it.

‍

Where the hours after an inspection really go

Ask an inspector where the time goes and you rarely hear "filling it in". You hear: the 140 photos that still need to go to the right room. The voice note where 3 defects run into each other. The client who wants last year's report next to this one to see what was fixed.

Take the work after an inspection apart and you usually find 6 steps:

• Sorting: linking photos and measurements to the right room, distribution board or part of the installation.

• Writing up: turning notes and voice recordings into readable findings.

• Classifying: deciding per finding how serious it is, using the scheme your firm or the certification scheme uses.

• Substantiating: looking up the clause or requirement and writing remedial advice.

• Comparing: checking what was fixed since the previous inspection and what is still open.

• Reviewing and sending: a colleague reads along, the inspector signs, the report goes to the client and the portal.

Ticking boxes in the app is perhaps 10% of the time. The rest goes to sorting, writing up, substantiating and comparing. That is exactly where AI can do the most, precisely because the work is so repetitive. The same defect appears in your reports hundreds of times a year, written down slightly differently each time.

On large sites this adds up fast. A complex building with many installations produces reports an inspector spends days on. But even for an average inspection of a few hours, 1.5 to 2.5 hours of report work is the rule rather than the exception.

‍

The real brake: 12 inspectors, 12 kinds of report

There is a second problem, and you only see it when you put 50 reports side by side. Every inspector writes in their own way. One calls a missing cover a serious defect, another a point of attention. One writes 3 lines of remedial advice, another only cites the standard. One client gets an 8 page report, another gets 22 pages for a comparable building.

That is not sloppiness. Good inspectors develop their own style over the years. For your firm it is a risk, though. A client who has 2 sites inspected by 2 inspectors sees the difference. A contractor does not know what to do with vague advice. And in a dispute about a classification you have to explain why colleague A saw it differently from colleague B.

We saw the same at a subsidy advisory firm we worked for. 5 advisors worked 5 ways in 5 tools. Not because anyone did it badly, but because nobody had ever written the process down. Only once it was on paper could anything be automated.

If you are accredited as an inspection body under ISO/IEC 17020, this matters even more. In the Netherlands the Dutch Accreditation Council (RvA) assesses whether your inspections and how you record them are controlled and repeatable. A new AI step in your report process therefore belongs in your procedures and your quality system, just like a new measuring instrument. That is no reason not to do it. It is a reason to do it properly.

‍

Who does what: AI drafts, rules check, the inspector signs

The split that works is always the same. AI does the work that is about language and sorting. Fixed rules in code check what is hard and measurable. And the inspector does what only a professional can do: judge and sign. You never reverse that order.

AI for inspection firms: who does what in an inspection report, AI drafts, fixed rules check, the inspector decides and signs

What AI does

AI turns voice notes into text, links photos to the right room and the right part of the installation, and drafts a finding per observation. The important part: that draft does not come out of thin air. The system searches your own findings library for the wording that fits best, with the classification, the reference and the remedial advice your firm always uses for it.

AI also puts the new report next to the previous one. Which defects from last year were fixed, which are still open, which are new. An inspector often spends an hour on that today, and it is exactly what clients value most.

What fixed rules do

Part of a good report is simply checkable. Every finding has a photo. Every finding has a classification and a reference. Every measurement sits in the right field and within the range of the instrument. The report lists the instruments used and the inspection date. All open defects from the previous inspection are addressed.

Those are not questions for a language model. They are fixed rules, and they belong in ordinary code. Code gives the same answer every time, you can test it, and you can show an auditor what it checks. A report that fails the rules does not go to the inspector for signing. It goes back with a list of what is missing.

What the inspector does

The inspector reads the draft, corrects it where the observation was different, decides every classification and signs. The report remains the inspector's report. AI proposes, the professional decides.

That is also why this model works in a regulated trade. Nothing changes about who is responsible. The only change is how much of that person's time goes to typing.

‍

The real work: your findings library

This is where most AI projects in this sector go wrong. They start with the model and forget the source. A language model that writes a finding without your library writes generic text. It sounds fine, but it does not match your classifications, your tone, and sometimes not the standard.

The library is the core. It is a list of the defects that keep coming back in your reports, per inspection type, with for each defect a standard description, the classification, the reference and the standard remedial advice. You do not build it from memory. You build it from your own archive.

Take the last 1,000 to 2,000 reports of 1 inspection type. Have the findings extracted and grouped. You will find that 80 to 150 defects cover the large majority of everything you write. Then your 2 or 3 best inspectors choose the best wording per defect, and they will disagree. Good. That discussion was overdue anyway.

This is what we call the Foundation: 1 source your firm and your AI both run on. It pays off even without AI. New inspectors learn faster, reviews go quicker, and clients get reports that look alike.

Want to put this on paper before you talk to anyone? Use the free AI product requirements template. It helps you answer the questions any builder will ask you anyway: which process, which volumes, which data, who decides, what a mistake costs.

‍

Worked example: an inspection firm with 4,800 inspections a year

An example, not a client. An inspection firm with 40 people, 22 of them inspectors. They run 4,800 inspections a year, mostly periodic inspections of electrical installations and fire safety in commercial buildings. On average 3 hours on site, 1 hour of travel and 2 hours of report work per inspection.

That report work adds up to 9,600 hours a year. With a findings library, draft reports and automatic checks, report time in this example drops to 45 minutes. The inspector reads, corrects and signs. That saves 1 hour and 15 minutes per inspection, 6,000 hours a year in total.

At about 1,500 productive hours per inspector, that is the capacity of 4 inspectors. People you spend months looking for in this labour market, if you find them at all.

At an internal cost of 75 euro an hour, the full saving is 450,000 euro a year. We do not plan with that number. In the first year people get used to a new way of working and not every inspection type is on board. So we plan with half: 3,000 hours, or 225,000 euro.

Against that:

• Blueprint: 7,500 euro, to map the report process and prioritise the inspection types.

• 2 automations: the draft report with the library, and the automatic checks with the link to your inspection app and portal. Together 70,000 euro.

• Operations: 2 times 1,250 euro a month, so 30,000 euro a year.

The one off cost is 77,500 euro. With half the saving and the operations cost deducted, that pays back in about 5 months. If it disappoints, say 30 minutes saved per report and only half of that realised in year 1, it takes a little over a year. That is still a good outcome, but you want to know it in advance.

The most important number is not in that list, by the way. With the full 6,000 hours, the same 22 inspectors can run more than 1,200 extra inspections a year in this example, without a single vacancy. For most inspection firms that is the real reason to start. How to build a payback case like this for your own process is in our payback playbook for AI automation.

‍

What you should not automate

Not everything that can be done should be. There are 4 things we deliberately leave with people at inspection firms.

The judgement on site. There are models that spot a discoloured connection or a missing cover in a photo. That works in a demo. In a real building, with bad light and a half open cabinet, they miss things or see things that are not there. And who is responsible then? Let the camera capture and the inspector judge.

The final classification. AI may propose a classification based on your library. The inspector decides. A proposal that gets corrected too often is a sign your library needs updating, not that the model needs more freedom.

Sending without a signature. A report never goes to a client or a portal automatically before an inspector has signed it by name. Not even when every rule is green.

Low volume inspection types. If you do a certain inspection 30 times a year, a library and a draft report deliver too little. Start with the type where you write the same thing hundreds of times a year.

An honest caveat. If your reports already take 30 minutes because you run a tight system with standard texts, the gain is smaller than in this example. Then your capacity is stuck somewhere else, for example in scheduling or travel. That is also an answer you would rather hear up front.

‍

How to start: 4 steps in 3 months

You do not have to rebuild the whole firm at once. A controlled start looks like this.

• Pick 1 inspection type with high volume and a lot of report work. Usually that is the periodic inspection you do most often.

• Collect the last 1,000 to 2,000 reports of that type and build the findings library from them, with your 2 or 3 best inspectors at the table.

• Let 3 inspectors work with draft reports for 4 weeks, next to their usual way of working. Measure report time and count how often they correct a proposal.

• Record it in your quality system: what the system does, what the rules check, who signs. Only then extend to the next inspection type.

Not sure yet which process comes first? Start wider. Our article on mapping the AI opportunities in your workflow shows how to compare steps on hours, volume and risk. It matches what Statistics Netherlands sees: in 2025, 27% of Dutch firms with 10 to 50 people used AI, mostly for marketing and sales. The core process, at an inspection firm the report, often stays untouched.

‍

What it costs, who works on it and what happens after launch

Straight about money, because you will ask anyway. With us it usually starts with a Blueprint of 2,500 to 10,000 euro, depending on the number of processes, in 10 to 20 working days. You get the report process mapped as it really runs, the bottlenecks priced in hours and euro, the AI opportunities ranked, a plan with fixed prices per step and a first rough prototype in your own repository. It is yours to keep. If you want to build it in house afterwards, you can.

Automating a major process costs 18,000 to 45,000 euro, fixed per automation. 1 bottleneck per milestone, a person approves where a mistake is expensive, and the system talks to your inspection app, your scheduling and your portal.

Who works on it? 2 engineers by name, from the Blueprint to year 2. No rotating team, no account manager between you and the people building it.

After launch, operations start. A named engineer is on the alert when something goes wrong, the AI cost per report is capped, you get a 1 page report every month, and when a standard or your library changes, the rules are updated. The response time is set in the Blueprint. Operations cost from 1,250 euro a month per automation.

And if month 1 disappoints? Exit after month 1: pay for what is delivered, keep everything.

Codelevate turns Dutch B2B service companies into software companies: we map the expert process you run by hand, automate it so the same team handles the volume, and build the platform your customers pay for, with 2 engineers by name from the blueprint to year 2.

Want to work out first what your report process costs and where it sticks? Download the free AI product requirements template and fill it in for 1 inspection type. Then you have something to send straight away.

‍

Send us what you have

A few anonymised reports, your checklist, a rough idea of your volumes. 1 of the 2 engineers reads it with you in 20 minutes, and you get 1 of 3 answers in writing the same day: do it in house, hire, or the Blueprint. Plan a call.

Table of Contents
Share this article

Common questions

Can AI write an inspection report on its own?

No. AI drafts the findings from your own findings library and fixed rules check that the report is complete, but the inspector reviews every finding, decides the classification and signs the report by name.

Is AI in the report process allowed for an ISO/IEC 17020 accredited inspection body?

Yes, as long as it is described in your procedures and quality system like any other tool, and the qualified inspector still judges and signs every report.

What does it cost to automate inspection reports?

With us a major process costs 18,000 to 45,000 euro fixed per automation, plus operations from 1,250 euro a month, usually after a Blueprint of 2,500 to 10,000 euro.

How much time does AI save per inspection report?

It depends on how you work today; in our worked example report time drops from 2 hours to 45 minutes, but a firm that already uses tight standard texts will gain less.

Should we use AI to detect defects in inspection photos?

We advise against it for the judgement itself: let the camera capture and the inspector assess, because image models miss things in real buildings and the responsibility stays with the inspector.

What happens after launch?

A named engineer is on the alert, the AI cost per report is capped, you get a 1 page monthly report, and rules are updated when a standard or your findings library changes.

Get started with
an intro call

This will help you get a feel for our team, learn about our process, and see if we’re the right fit for your project. Whether you’re starting from scratch or improving an existing software application, we’re here to help you succeed.